Ghostscript/GSview (Postscript Viewer/Printer)

CSG has posted this information on behalf of others. This information is likely dated. Use at your own risk.

Next - Prev - Contents

Getting the files:

  1. Go to the Ghostscript/Ghostview/GSview home page: http://www.cs.wisc.edu/~ghost/
  2. Follow the ``Obtaining Aladdin Ghostscript...'' link.
  3. Get the self-extracting EXE for MS-Windows containing GSview and Aladdin Ghostscript.
Installation & configuration:
(your paths to \texmf and \gstools may be different, so make changes accordingly):
  1. Run the self-extracting EXE to install (the default options should be fine).
  2. Run GSview from the start menu.
  3. If you have MiKTeX installed: during configuration, for ``Search for additional type 1 fonts in:'', specify \texmf\fonts\type1
  4. In the Media menu, select Letter (this means 8.5" x 11" paper).
  5. Select your printer:
    1. Open a postscript document in GSview (eg., \gstools\gs5.50\chess.ps).
    2. Choose Print from the File menu.
    3. Try to select something under ``Device'' that most closely matches your printer (eg., ljet4 for HP Laserjet 4 or higher).
    4. Select the resolution of your printer and hit ``OK''. Now you should get a printout, and your printer settings will be saved.
  6. If you have MiKTeX installed: make sure you do Start -> Programs -> MiKTeX -> Maintenance -> Refresh Filename Database.


Next - Prev - Contents